A unique professional tool capable of identifying sensor actions and orientation through 6-axis 3D measurement, enabling precise detection of the root causes of EMC issues.
3D spatial electromagnetic field visualization system （WM9500）
The 3D space electromagnetic field visualization system (hereinafter referred to as this system) is a system that aims to detect the XYZ position in space with a handheld coordinate sensor and measure the noise radiated from the object to be measured in 3D. is. You can easily measure noise using your antenna or sensor. In this system, the measurement point in space can be set arbitrarily, which enables noise measurement with a high degree of freedom compared to the conventional noise measurement system.
| Scanning range |
W300 × D215 × H100 (mm) / W11.8 × D8.4 × H3.9 (inch) (Camera Range) |
| scanning method |
Near-field magnetic probe scanning (w/ laser rangefinder) |
|
Positional accuracy (X, Y, Z) |
±0.01 mm (when moving in a single direction) |
|
Positional accuracy (θ) |
±1.0° |
|
Scanning frequency band |
150 kHz – 3 GHz (standard) / 150 kHz – 8 GHz (optional) |
|
Minimum scanning step |
0.1 mm |
|
External dimensions |
W409 × D709× H620 (mm) / 16.1 × 27.9 × 24.4 (inch) (not including connectors or other protruding objects) |
|
Weight |
Approximately 40 kg / 88 lbs (Main unit only. Not including spectrum analyzer or PC.) |
|
Input voltage |
100-240 V AC |
|
Maximum power consumption |
150 VA (not including the spectrum analyzer) |
Epoch-making method High accuracy 3D measurement
WM9500 can detect the location of the XYZ in the space out by using infrared sensor and measure the electromagnetic wave emitted from the target objects.
So, we can get the indispensable date to analyze the noise source, the radiate pattern and the frequencies.
No matter how the measuring environment and where the place is, the coordinates can be detected by infrared. And the test doesn’t be affected by the site lightness and the color of the target objects, so the noise of the units and the end products can be measured. It is possible to measure in almost all the places regardless of the narrow place or darkroom such as the car engine room and truck room. The most attractive feature of the WM9500 is that it can easily obtain detailed and multidimensional measurement date by utilizing the mobility of hand-held measurement method.
The 5 basic structures of the system are composed of “stereo camera” with tripod integrated CCD camera, note PC for controlling, controller unit, marking ball and specialized software.
It is possible to use the spectrum analyzer and antenna for measuring you have directly due to their portability to reduce the cost of introduction at first.
In the measuring range, the scan area can be set freely to complete the measurement. The scan step in the space also can be set freely. The date of the XYZ coordinate and the electromagnetic noise can be measured in a same time. The noise maps of the XZ plane, XY plane, YZ plane can be displayed after measuring.
Find important product information and resources here. Download helpful documents to learn more.
Your contact person
